Component Glossary

100% cotton 3” patches are designed to clean .243cal through 12/10ga firearms by its proprietary patch method. Each patch can be used up to 6 times, offering 6 new cleaning surfaces. When attached to the slotted tip, they form a perfectly circular cleaning swab to allow for 360 degree coverage.

100% cotton 2” patches are designed to clean .17- .223cal firearms by its proprietary patch method. Each patch can be used up to 6 times, offering 6 new cleaning surfaces. When attached to the slotted tip, they form a perfectly circular cleaning swab to allow for 360 degree coverage.

100% cotton 3” Panoply patches are designed to clean 30 caliber and up, handguns 9mm and up, and all shotguns by its proprietary patch method and are composed of a thickers material that the All Caliber Patch to accommodate larger calibers.Each patch can be used up to 6 times, offering 6 new clean surfaces. When attached to the slotted tip, they form a perfectly circular cleaning swab to allow for 360 degree coverage.

These patented devices are used to get a nice tight patch while cleaning your shotguns. Used in conjunction with the 3” All Caliber or Panoply patches and slotted tip, the Patch Saver ® creates 360 degree coverage in the barrell. Available in 2 sizes: Use the small Patch Saver ® for 20, 28, and 16ga. and the large Patch Saver ® for 12 and 10 ga shotguns.

The Memory-Flex ® cleaning rods come in a variety of lengths and are compatible with all Otis cleaning components. Together with the solid brass slotted tips, 100% cotton cleaning patches, a bore brush, and an all-in-one cleaner, lubricant, and protectant, you can properly clean your firearm from Breech-to-Muzzle®. The flexible cables are coated and have a 750 lb pull strength and are available with 8-32 or 5-40 threaded ends.

Otis offers 4 different slotted tips; the small slotted tip is used for .22 - .27cal firearms, the large slotted tip is used for .30 - .50cal firearms, the .50cal slotted tip is used for .50cal rifles and pistols, and the shotgun slotted tip is used for all shotguns. The slotted tips get attached to the end of the Memory-Flex® cable and used in conjunction with 2”, 3” and Panoply patches to create a cleaning swab.

Used to knock out bore obstructions. These attach to the end of the Memory-Flex® cable, and can be used to clear the bore of mud, snow, dirt, or stuck cases. The end of the obstruction remover is concave so to not hit the firing pin when trying to remove a stuck bullet. This also prevents the stuck round from mushrooming within the barrel. The obstruction remover also acts as a T-handle base. Available in small and large.

The thread connector has an 8-32 thread and screws into the Memory-Flex® cable. This allows you to combine two cables together increasing the length for longer bores.

The shotgun brush adapter is used to adapt to shotgun brush threads that do not have 8-32 threads. One end has the standard 8-32 threads, which will screw into the Otis Memory-Flex® cleaning rods, and the other end has 5/16-27 threads for shotgun brushes you may currently own.

The T-handle bar can be used with any of the Otis obstruction removers for added comfort while pulling a patch through from Breech-to-Muzzle®. Just insert the T-handle bar through the hole in the end of the obstruction remover/T-handle base; the T-handle is tapered so it will stop half way through.

The NATO Adapter is used to adapt to brush threads that do not have 8-32 threads. One end has the standard 8-32 threads, which will screw into the Otis Memory-Flex® cleaning cables, and the other end has 8-36 threads for brushes you may currently own.

The female rod, used in conjunction with the male rod, act as a handle, and can be added onto any Otis component with 8-32 thread for additional length during precision cleaning.

The male rod, used in conjunction with the female rod, act as a handle, and can be added onto any Otis component with 8-32 thread for additional length during precision cleaning.

Flag an empty chamber to indicate safety and can also be used as a bore light to check bore for cleanliness.

Exclusive to the Patriot Series ® line of cleaning kits, the Patriot T-handle is a multi-purpose tool that functions as a t-handle, rod handle (attach a rod to the 8-32 threaded insert) and bit driver (insert selected bit into bit holder). Four bits included: 5/32” hex, T20 hex, Phillips #0, Phillips #2

The brass scraper is used to clean carbon deposits and other debris from the bolt face, rails or any other flat surface on your firearm.

This scraper is designed specifically for the locking lugs of your AR-15/M4/M16. It has a 90 degree bend to clean the backside of the locking lugs.

The straight pick is engineered to clean in the tight crevices of your firearm.

This end brush can be used to lubricate the slides, but also has stiff enough bristles to dust off carbon and other loose debris.

Short All Purpose Receiver brush complete with male 8-32 thread so that it may be connected to any female accessory. The Blue Nylon Brush features stiff bristles that allow for a more aggressive clean. Removes fresh carbon or powder residue but won’t scratch your firearm finish. For everyday use and can be used on virtually any surface including wood surfaces.